This course ’Practical FFP assessment of pressure plant defects using API 579’ is designed as a modular course that is tailored to the specific needs of offshore and onshore engineers working in the field of integrity assessment The course is based on manual calculation examples of the most straightforward API 579 modules. These are based on non-elevated temperature applications and exclude complex crack analysis. The course is specifically targeted at developing an understanding of the underlying principles rather than specific skills in using proprietary software.It is suitable for engineers with an interest in assessing corroded vessels/pipes, code and out-of-code assessments but without a detailed knowledge of stress analysis. You will need a reasonable (Secondary School) understanding of Maths. There is an end-of course test comprising multiple choice and descriptive questions (this does not include detailed calculations) with a pass mark of 70%.

Course fee £1,595+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

This course ’Practical FFP assessment of pressure plant defects using API 579’ is designed as a modular course that is tailored to the specific needs of offshore and onshore engineers working in the field of integrity assessment The course is based on manual calculation examples of the most straightforward API 579 modules. These are based on non-elevated temperature applications and exclude complex crack analysis. The course is specifically targeted at developing an understanding of the underlying principles rather than specific skills in using proprietary software.It is suitable for engineers with an interest in assessing corroded vessels/pipes, code and out-of-code assessments but without a detailed knowledge of stress analysis. You will need a reasonable (Secondary School) understanding of Maths. There is an end-of course test comprising multiple choice and descriptive questions (this does not include detailed calculations) with a pass mark of 70%.

Course fee £1,695+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

This course ’Practical FFP assessment of pressure plant defects using API 579’ is designed as a modular course that is tailored to the specific needs of offshore and onshore engineers working in the field of integrity assessment The course is based on manual calculation examples of the most straightforward API 579 modules. These are based on non-elevated temperature applications and exclude complex crack analysis. The course is specifically targeted at developing an understanding of the underlying principles rather than specific skills in using proprietary software.It is suitable for engineers with an interest in assessing corroded vessels/pipes, code and out-of-code assessments but without a detailed knowledge of stress analysis. You will need a reasonable (Secondary School) understanding of Maths. There is an end-of course test comprising multiple choice and descriptive questions (this does not include detailed calculations) with a pass mark of 70%.

Course fee £1,695+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 1 is a 5-day entry-level course for those wishing to consolidate their experience before moving on to ASME L2 or API inspection qualifications. It is the main route for inspectors and technicians planning a move into plant inspection from another discipline (such as NDT, weld inspection etc). Contains combined classroom and hands-on workshop training covering the basic topics of in-service plant inspection.

• The PSSRs (Minor systems):Responsibilities, Written Schemes
• Inspection of Vessels, Pipework and Heat Exchangers
• Basic stress /corrosion calculations
• Basic application of API inspection codes
• Corrosion severity
• Inspection reporting

All course material, text books, exam and certificate costs are included in the course fee. Course contains 90 minute examination and assessed vessel inspection reporting exercise. Individual pass certificates awarded by ASME (non-renewable)

Course fee £1,795+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 1 is a 5-day entry-level course for those wishing to consolidate their experience before moving on to ASME L2 or API inspection qualifications. It is the main route for inspectors and technicians planning a move into plant inspection from another discipline (such as NDT, weld inspection etc). Contains combined classroom and hands-on workshop training covering the basic topics of in-service plant inspection.

• The PSSRs (Minor systems):Responsibilities, Written Schemes
• Inspection of Vessels, Pipework and Heat Exchangers
• Basic stress /corrosion calculations
• Basic application of API inspection codes
• Corrosion severity
• Inspection reporting

All course material, text books, exam and certificate costs are included in the course fee. Course contains 90 minute examination and assessed vessel inspection reporting exercise. Individual pass certificates awarded by ASME (non-renewable)

Course fee £1,795+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 1 is a 5-day entry-level course for those wishing to consolidate their experience before moving on to ASME L2 or API inspection qualifications. It is the main route for inspectors and technicians planning a move into plant inspection from another discipline (such as NDT, weld inspection etc). Contains combined classroom and hands-on workshop training covering the basic topics of in-service plant inspection.

• The PSSRs (Minor systems):Responsibilities, Written Schemes
• Inspection of Vessels, Pipework and Heat Exchangers
• Basic stress /corrosion calculations
• Basic application of API inspection codes
• Corrosion severity
• Inspection reporting

All course material, text books, exam and certificate costs are included in the course fee. Course contains 90 minute examination and assessed vessel inspection reporting exercise. Individual pass certificates awarded by ASME (non-renewable)

Course fee £1,795+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 1 is a 5-day entry-level course for those wishing to consolidate their experience before moving on to ASME L2 or API inspection qualifications. It is the main route for inspectors and technicians planning a move into plant inspection from another discipline (such as NDT, weld inspection etc). Contains combined classroom and hands-on workshop training covering the basic topics of in-service plant inspection.

• The PSSRs (Minor systems):Responsibilities, Written Schemes
• Inspection of Vessels, Pipework and Heat Exchangers
• Basic stress /corrosion calculations
• Basic application of API inspection codes
• Corrosion severity
• Inspection reporting

All course material, text books, exam and certificate costs are included in the course fee. Course contains 90 minute examination and assessed vessel inspection reporting exercise. Individual pass certificates awarded by ASME (non-renewable)

Course fee £1,895+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 1 is a 5-day entry-level course for those wishing to consolidate their experience before moving on to ASME L2 or API inspection qualifications. It is the main route for inspectors and technicians planning a move into plant inspection from another discipline (such as NDT, weld inspection etc). Contains combined classroom and hands-on workshop training covering the basic topics of in-service plant inspection.

• The PSSRs (Minor systems):Responsibilities, Written Schemes
• Inspection of Vessels, Pipework and Heat Exchangers
• Basic stress /corrosion calculations
• Basic application of API inspection codes
• Corrosion severity
• Inspection reporting

All course material, text books, exam and certificate costs are included in the course fee. Course contains 90 minute examination and assessed vessel inspection reporting exercise. Individual pass certificates awarded by ASME (non-renewable)

Course fee £1,895+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 1 is a 5-day entry-level course for those wishing to consolidate their experience before moving on to ASME L2 or API inspection qualifications. It is the main route for inspectors and technicians planning a move into plant inspection from another discipline (such as NDT, weld inspection etc). Contains combined classroom and hands-on workshop training covering the basic topics of in-service plant inspection.

• The PSSRs (Minor systems):Responsibilities, Written Schemes
• Inspection of Vessels, Pipework and Heat Exchangers
• Basic stress /corrosion calculations
• Basic application of API inspection codes
• Corrosion severity
• Inspection reporting

All course material, text books, exam and certificate costs are included in the course fee. Course contains 90 minute examination and assessed vessel inspection reporting exercise. Individual pass certificates awarded by ASME (non-renewable)

Course fee £1,895+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 1 is a 5-day entry-level course for those wishing to consolidate their experience before moving on to ASME L2 or API inspection qualifications. It is the main route for inspectors and technicians planning a move into plant inspection from another discipline (such as NDT, weld inspection etc). Contains combined classroom and hands-on workshop training covering the basic topics of in-service plant inspection.

• The PSSRs (Minor systems):Responsibilities, Written Schemes
• Inspection of Vessels, Pipework and Heat Exchangers
• Basic stress /corrosion calculations
• Basic application of API inspection codes
• Corrosion severity
• Inspection reporting

All course material, text books, exam and certificate costs are included in the course fee. Course contains 90 minute examination and assessed vessel inspection reporting exercise. Individual pass certificates awarded by ASME (non-renewable)

Course fee £1,895+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 1 is a 5-day entry-level course for those wishing to consolidate their experience before moving on to ASME L2 or API inspection qualifications. It is the main route for inspectors and technicians planning a move into plant inspection from another discipline (such as NDT, weld inspection etc). Contains combined classroom and hands-on workshop training covering the basic topics of in-service plant inspection.

• The PSSRs (Minor systems):Responsibilities, Written Schemes
• Inspection of Vessels, Pipework and Heat Exchangers
• Basic stress /corrosion calculations
• Basic application of API inspection codes
• Corrosion severity
• Inspection reporting

All course material, text books, exam and certificate costs are included in the course fee. Course contains 90 minute examination and assessed vessel inspection reporting exercise. Individual pass certificates awarded by ASME (non-renewable)

Course fee £1,895+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 2 is an intensive 4-day examined course covering advanced aspects of in-service inspection of pressure equipment and related plant in the oil/gas/petroleum/petrochemical industries .The course is suitable for candidates with an existing plant inspector qualification who wish to demonstrate a higher level of technical knowledge relating to plant inspection in the oil/gas/petroleum industry. Topics include:

• Role of the ‘Technical Authority’
• API 579 assessment modules
• API 580 580/581 RBI assessments
• Advanced corrosion: API 571
• Vessel/pipework/pipeline defect assessment
• Weld repair techniques
• Pressure testing
The course has a 2 hour examination comprising six descriptive questions. Delegates who reach the exam pass mark of 70% receive a certificate awarded by ASME. This certificate is specific to the individual delegate and is currently non-renewable.

Course fee £1,795+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 2 is an intensive 4-day examined course covering advanced aspects of in-service inspection of pressure equipment and related plant in the oil/gas/petroleum/petrochemical industries .The course is suitable for candidates with an existing plant inspector qualification who wish to demonstrate a higher level of technical knowledge relating to plant inspection in the oil/gas/petroleum industry. Topics include:

• Role of the ‘Technical Authority’
• API 579 assessment modules
• API 580 580/581 RBI assessments
• Advanced corrosion: API 571
• Vessel/pipework/pipeline defect assessment
• Weld repair techniques
• Pressure testing
The course has a 2 hour examination comprising six descriptive questions. Delegates who reach the exam pass mark of 70% receive a certificate awarded by ASME. This certificate is specific to the individual delegate and is currently non-renewable.

Course fee £1,795+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 2 is an intensive 4-day examined course covering advanced aspects of in-service inspection of pressure equipment and related plant in the oil/gas/petroleum/petrochemical industries .The course is suitable for candidates with an existing plant inspector qualification who wish to demonstrate a higher level of technical knowledge relating to plant inspection in the oil/gas/petroleum industry. Topics include:

• Role of the ‘Technical Authority’
• API 579 assessment modules
• API 580 580/581 RBI assessments
• Advanced corrosion: API 571
• Vessel/pipework/pipeline defect assessment
• Weld repair techniques
• Pressure testing
The course has a 2 hour examination comprising six descriptive questions. Delegates who reach the exam pass mark of 70% receive a certificate awarded by ASME. This certificate is specific to the individual delegate and is currently non-renewable.

Course fee £1,895+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 2 is an intensive 4-day examined course covering advanced aspects of in-service inspection of pressure equipment and related plant in the oil/gas/petroleum/petrochemical industries .The course is suitable for candidates with an existing plant inspector qualification who wish to demonstrate a higher level of technical knowledge relating to plant inspection in the oil/gas/petroleum industry. Topics include:

• Role of the ‘Technical Authority’
• API 579 assessment modules
• API 580 580/581 RBI assessments
• Advanced corrosion: API 571
• Vessel/pipework/pipeline defect assessment
• Weld repair techniques
• Pressure testing
The course has a 2 hour examination comprising six descriptive questions. Delegates who reach the exam pass mark of 70% receive a certificate awarded by ASME. This certificate is specific to the individual delegate and is currently non-renewable.

Course fee £1,895+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training ASME Plant Inspector Level 2 is an intensive 4-day examined course covering advanced aspects of in-service inspection of pressure equipment and related plant in the oil/gas/petroleum/petrochemical industries .The course is suitable for candidates with an existing plant inspector qualification who wish to demonstrate a higher level of technical knowledge relating to plant inspection in the oil/gas/petroleum industry. Topics include:

• Role of the ‘Technical Authority’
• API 579 assessment modules
• API 580 580/581 RBI assessments
• Advanced corrosion: API 571
• Vessel/pipework/pipeline defect assessment
• Weld repair techniques
• Pressure testing
The course has a 2 hour examination comprising six descriptive questions. Delegates who reach the exam pass mark of 70% receive a certificate awarded by ASME. This certificate is specific to the individual delegate and is currently non-renewable.

Course fee £1,895+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

An intensive 3-day group training programme covering the practical and team-working aspects of RBI of pressure systems and related equipment.

Combined technical and group dynamics training covering:

• Practical UK application of the semi-quantitative RBI approach
• Defect criticality assessment
• Pressure vessels, boilers, pipework , protective devices: BS/ASME
• Using selected API 580/581 methodologies, how to design the RBI team
• Team working methods and group dynamics

This is an ASME approved course with ongoing assessment and examination. Successful delegates will receive ASME certificates

Course fee £1,695+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

An intensive 3-day group training programme covering the practical and team-working aspects of RBI of pressure systems and related equipment.

Combined technical and group dynamics training covering:

• Practical UK application of the semi-quantitative RBI approach
• Defect criticality assessment
• Pressure vessels, boilers, pipework , protective devices: BS/ASME
• Using selected API 580/581 methodologies, how to design the RBI team
• Team working methods and group dynamics

This is an ASME approved course with ongoing assessment and examination. Successful delegates will receive ASME certificates

Course fee £1,695+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training course: ENGINEERING ROOT CAUSE ANALYSIS is a 2-day familiarisation course that is suitable for engineers of all disciplines who get involved in technical problem solving in an engineering environment.

The Matthews Training course: ENGINEERING ROOT CAUSE ANALYSIS is a 2-day familiarisation course that is suitable for engineers of all disciplines who get involved in technical problem solving in an engineering environment.

The Matthews Training course: ENGINEERING ROOT CAUSE ANALYSIS is a 2-day familiarisation course that is suitable for engineers of all disciplines who get involved in technical problem solving in an engineering environment

An intensive 3-day group training programme covering the practical and team-working aspects of RBI of pressure systems and related equipment. Combined technical and group dynamics training covering:

• Practical UK application of the semi-quantitative RBI approach
• Defect criticality assessment
• Pressure vessels, boilers, pipework , protective devices: BS/ASME
• Using selected API 581 methodologies, how to design the RBI team
• Team working methods and group dynamics

This is an ASME approved course with ongoing assessment and examination. Successful delegates will receive ASME certificates

Course fee £1,695+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

An intensive 3-day group training programme covering the practical and team-working aspects of RBI of pressure systems and related equipment. Combined technical and group dynamics training covering:

• Practical UK application of the semi-quantitative RBI approach
• Defect criticality assessment
• Pressure vessels, boilers, pipework , protective devices: BS/ASME
• Using selected API 581 methodologies, how to design the RBI team
• Team working methods and group dynamics

This is an ASME approved course with ongoing assessment and examination. Successful delegates will receive ASME certificates

Course fee £1,695+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training course ‘Inspection and maintenance of pressure relief valves (PRVs) is a practical training course tailored to the specific needs of the owners/operators of pressure systems. It combines classroom instruction and practical workshop training on various types of PRVs. It is an independent course that covers various types of PRV designs and is not specific to any equipment manufacturer. The global objectives of the course programme are to:

 

• Provide a mechanism for training and familiarisation of delegates staff with pressure relief valves, which are important safety-critical items of pressure equipment under The PSSRs and similar statutory requirements in other countries

 

• Enable delegates to develop familiarity with the practical aspects of PRV inspection and maintenance and demonstrate this familiarity to external bodies such as the site Competent Person and HSE.

 

This course operates as a public course at various venues and on demand as an in-house course at client’s sites. The course assessment consists of three parts:

 

• Continuous assessment of delegates throughout the duration of the course, particularly during the participation exercises.

 

• Written tests comprising a combination of multiple choice and descriptive questions. The pass mark is 70%.

 

• Practical workshop assessment test on PRVs using a case study format

Course fee £1,595+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training course ‘Inspection and maintenance of pressure relief valves (PRVs) is a practical training course tailored to the specific needs of the owners/operators of pressure systems. It combines classroom instruction and practical workshop training on various types of PRVs. It is an independent course that covers various types of PRV designs and is not specific to any equipment manufacturer. The global objectives of the course programme are to:

 

• Provide a mechanism for training and familiarisation of delegates staff with pressure relief valves, which are important safety-critical items of pressure equipment under The PSSRs and similar statutory requirements in other countries

 

• Enable delegates to develop familiarity with the practical aspects of PRV inspection and maintenance and demonstrate this familiarity to external bodies such as the site Competent Person and HSE.

 

This course operates as a public course at various venues and on demand as an in-house course at client’s sites. The course assessment consists of three parts:

 

• Continuous assessment of delegates throughout the duration of the course, particularly during the participation exercises.

 

• Written tests comprising a combination of multiple choice and descriptive questions. The pass mark is 70%.

 

• Practical workshop assessment test on PRVs using a case study format

Course fee £1,595+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training course ‘Inspection and maintenance of pressure relief valves (PRVs) is a practical training course tailored to the specific needs of the owners/operators of pressure systems. It combines classroom instruction and practical workshop training on various types of PRVs. It is an independent course that covers various types of PRV designs and is not specific to any equipment manufacturer. The global objectives of the course programme are to:

 

• Provide a mechanism for training and familiarisation of delegates staff with pressure relief valves, which are important safety-critical items of pressure equipment under The PSSRs and similar statutory requirements in other countries

 

• Enable delegates to develop familiarity with the practical aspects of PRV inspection and maintenance and demonstrate this familiarity to external bodies such as the site Competent Person and HSE.

 

This course operates as a public course at various venues and on demand as an in-house course at client’s sites. The course assessment consists of three parts:

 

• Continuous assessment of delegates throughout the duration of the course, particularly during the participation exercises.

 

• Written tests comprising a combination of multiple choice and descriptive questions. The pass mark is 70%.

 

• Practical workshop assessment test on PRVs using a case study format

Course fee £1,695+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course

The Matthews Training course ‘Inspection and maintenance of pressure relief valves (PRVs) is a practical training course tailored to the specific needs of the owners/operators of pressure systems. It combines classroom instruction and practical workshop training on various types of PRVs. It is an independent course that covers various types of PRV designs and is not specific to any equipment manufacturer. The global objectives of the course programme are to:

 

• Provide a mechanism for training and familiarisation of delegates staff with pressure relief valves, which are important safety-critical items of pressure equipment under The PSSRs and similar statutory requirements in other countries

 

• Enable delegates to develop familiarity with the practical aspects of PRV inspection and maintenance and demonstrate this familiarity to external bodies such as the site Competent Person and HSE.

 

This course operates as a public course at various venues and on demand as an in-house course at client’s sites. The course assessment consists of three parts:

 

• Continuous assessment of delegates throughout the duration of the course, particularly during the participation exercises.

 

• Written tests comprising a combination of multiple choice and descriptive questions. The pass mark is 70%.

 

• Practical workshop assessment test on PRVs using a case study format

Course fee £1,695+VAT

Please email: enquiries@matthews-training.co.uk

More Information about this course